1. Installation-free: The A24Pro overall frame is cast in one piece from aluminum alloy. It can be used out of the box without installation and has excellent structural stability.
3. More stable and high-speed structure: The bottom frame of the A24Pro is formed in one piece, and the X-axis metal adopts a dual-axis guide rail structure. The working vibration is very small, ensuring that the machine does not shake when running at a high speed of, 36000mm/Min.
5. Ultra-high power: Using the most stable 20W high optical power laser module at present. The latest coupling technology of four 6W optical power second-generation fiber-encapsulated lasers, with powerful power and long optical waist, can cut 18 paulownia wood boards, 10mm black acrylic boards, 15mm basswood plywood, 5mmMDF, 5-layer laser-specific vinyl, and even cut at one time 0.05mm stainless steel sheet. It also adopts a fixed focus design and can quickly and accurately focus in 10 seconds.
7. New non-clogging laser: The new A20 laser has a built-in tool-free focusing module and reserved an installation place for nozzle and pipe of air assist system, without wire interference, simple and beautiful. There is also a patented double-layer wind collecting cover design, which can ensure long-term use without clogging or contaminating the lens, greatly extending the life of the laser. (The air assist pump need to purchase separately)
9. New filter panoramic glass eye protection design: The panoramic filter glass protective cover plays a very good role in protecting your eyes, filtering 97% of ultraviolet light. You and the people around you do not need to wear goggles to watch. Laser engraving. Reduce your goggle expense and inconvenience of wearing goggles.
11. Upgraded compressed spot coupling technology: the ultra-fine laser focus area is reduced to 0.06*0.06mm. The high-density laser can easily cut 20mm thick plywood and 30mm thick black acrylic; it can directly engrave mirror stainless steel metal, ceramics, glass, engraving & The cutting speed is 40% higher than theOrdinary model, and the extreme cutting effect is comparable to that of a 300W CO₂ laser engraving machine.
Model: ATOMSTACK A24Pro
Materials that can be engraved/cut
Cutting materials: cardboard, non-woven fabrics, wooden boards, plywood, acrylic (transparent needs to be painted black), some thin plastic boards, sponges, aluminum and stainless steel and other metal sheets;
Laser wavelength: 455±5nm
Focusing method: fixed focus laser, no focus adjustment required
Operating software: LaserGRBL, LightBurn, supports Win XP/Win 7/Win 8/XP/Win 10 system
Data transfer method: USB connection
Safety Guidelines:
